Fully Frameless Shower Screen - Using Hard Gold Plated, 316 Stainless Steel Fittings

This is a huge screen that did require a bracing bar, the one chosen connects to the top of the LHS panel and runs at a 45° angle back to the wall, this type of brace removes approximately 95% of lateral movement from the panel.

There was also a membrane protruding from the floor that had to be covered and not cut off, so we covered it with a small dome, this was very successful and finished the job off very well.

The measurements of this screen are 2100 mm high with 900mm return panels and 850mm across the front. The actual door is 650mm wide.